How to fix no power on my Pyle PLCDBT95MRB?
If your Pyle Car Receiver has no power, there could be a couple of reasons. First, make sure your car ignition switch is turned to “ACC” if the power supply is connected to the car accessory circuits. Also, check the fuse. If it's blown, you'll need to replace it.
Why is there no sound coming from my Pyle Car Receiver?
If you're not getting any sound from your Pyle Car Receiver, there are a couple of things to check: * Ensure that the volume isn't set to the minimum. Adjust it to a comfortable listening level. * Verify that all the wiring is properly connected. A loose or incorrect connection can cause a lack of sound.
What to do if the radio does not work on my Pyle PLCDBT95MRB?
If the radio on your Pyle Car Receiver isn't working, or the automatic station selection isn't functioning, check these potential causes: * Make sure the antenna cable is securely inserted. * If the signals are too weak for automatic selection, try selecting a station manually.
Why won't my Pyle Car Receiver load or eject the disc?
If your Pyle Car Receiver is having trouble loading or ejecting discs, consider the following possibilities: * If there is already a CD disc inside the player, remove the disc in the player, then put a new one. * Make sure you're inserting the disc correctly, with the label facing upward. * The compact disc is extremely dirty or detective disc. Clean the disc or try to play a new one. * If the temperature inside the car is too high, cool off or until the ambient temperature return to normal. * Condensation may have formed. Leave the player off for about an hour, and then try again.
What to do if my Pyle PLCDBT95MRB Car Receiver sound skips?
If the sound skips while playing on your Pyle Car Receiver, it could be due to: * The installation angle being more than 30 degrees. Adjust the installation angle to be less than 30 degrees. * The disc being extremely dirty or defective. Clean the compact disc, then try to play a new one.
How to fix Pyle Car Receiver operation keys that do not work?
If the operation keys on your Pyle Car Receiver aren't working, it might be because the built-in microcomputer isn't operating properly due to noise. Try pressing the RESET button.
General| Brand | Pyle |
|---|---|
| Model | PLCDBT95MRB |
| Category | Car Receiver |
| Language | English |
Describes the process of installing the unit into a standard DIN slot in a vehicle dashboard.
Step-by-step guide on how to detach the car audio unit from its dashboard mounting.
Identifies and lists all buttons and their functions on the car audio unit.
Covers unit power, sound, loudness, EQ, display, and time settings.
Instructions for switching to radio mode, selecting frequency bands, and tuning stations.
Automating memory storage, program scanning, and manual station recall.
Guides on playing CDs, MP3s, and WMAs, including track selection and playback controls.
Methods for searching tracks, files by name, or by folder on MP3/WMA discs.
How to insert and play music files from an SD card.
Details on compatible MP3/WMA decoding modes and USB storage specifications.
Important information and warnings regarding disc usage, types, and potential data loss.
Specific requirements for MP3 file formats and disc compatibility.
Steps to pair a mobile phone and establish a Bluetooth connection.
Managing incoming calls and streaming audio via Bluetooth.
Details the functions of each button on the optional remote control.
To Next Page
