Page: 15
5) To communicate with the
Enforcer panel, click on the
System Name and enter a valid
user code.
6) Select the action to perform e.g.
arming/disarming an area, triggering
an output or inhibiting an input.
7) To disconnect, click 'Disconnect
Home'.
NOTE: All new mobile devices, when
first connected, will be disabled by
default. The cloud administrator will
need to manually enable these
devices before they will be able to
connect to the panel. This is an
additional security feature to
prevent unauthorised access.
An Enforcer panel can only be
claimed by one cloud administrator.
TOUCH LOCK SYMBOLS
TO ARM
To Next Page
Loading...
