Page: 17
M. Master Manager Menu Options
Bypass Inputs Disables any sensor (input) on the system for the current arming period. This feature also disables tamper alarms.
Operate User Outputs Activates/deactivates user automation outputs that are used to remotely activate the devices such as electronic gates, lights
etc.
*Date & Time Programs the date and time and enables the summer-time automatic adjustment.
*Learn User Codes,
Keyfobs and Tags
Programs the user codes, tags and learns keyfobs to the Enforcer 32-WE.
Review Log The ‘Review Logs’ function is used to view all operational information of the alarm system, such as arming/disarming
information, access control and alarm activations etc.
Set Up App To use the Pyronix App (see page: 12), this function must be enabled.
SMS Phonebook If SMS texting is enabled, there will be up to 4 mobile numbers that can be programmed to send SMS alarms. Please discuss
this feature with your installer if required.
Walk Test The ‘Walk Test’ function allows the testing of all programmed inputs on the alarm system.
Bell Test This function is used to test the external siren (wired and wireless) and strobe.
PC Connect Menu The control panel may be dialled into, and programming information kept on a PC using the InSite UDL software. This function
allows the control panel to dial a Pre-programmed PC telephone number (programmed by your engineer). This is usually used
by your engineer during a maintenance call.
Allow Engineer Menu If this function is enabled, the engineer will require authorisation from you before they can access the engineer menu.
Block Remote Arming Blocks any attempt at arming the system remotely via the upload/download software functionality
Block UDL Blocks any attempt at dialling into the system remotely via the upload/download software functionality
System Sounds Demo This function demonstrates all the sounds of the Enforcer.
Exit Manager Mode Exits the Manager Mode
NOTE 1: Pressing the A key will exit the master manager menu at any main menu option above.
NOTE 2: Make sure you change the default master user code.
*These features are needed to quickly set up the Enforcer.
To Next Page
Need help?
General
