To Next Page

To Previous Page

Page: 5

B. Operating the Enforcer 32-WE

Default Master Manager Code: 1234

Arming/Disarming Methods:

There are four different devices that may be used in the process of arming/disarming the alarm

system; these are the keypad, tag reader, keyfob and mobile (Android or iOS) device –using the app.

Button Operations

a = Exit engineer menu/Selects Area A

b = Moves backwards to the previous main menu item / Selects Area B

c = Displays additional information in the log / Scrolls to the previous option in a sub-menu / Selects area C.

d = Moves forward in the log / Selects Area D

f p = Used for Fire and PA Alarms

[ ] = Directional buttons (used for choosing options and moving through text)

t = Selects items and enters menu's.

x = Moves forward in the main menu and sub-menu / Exits option to sub-menu and sub-menu to main

menu.

How to navigate through the menus.

x = “NO” - Press to move forward when in Engineer or Master Manger mode.

b = “BACK” - Press to move backward when in Engineer or Master Manger mode

t = “YES” - Press to enter in a submenu or option when in Engineer or Master Manger mode

] = Press to move from one option into another option while in a submenu

a = Press to quick exit the Engineer Menu from any main menu (written in capital letters)

c = “CANCEL” - Press to move back from one programmable option to the previous option.

Main menus are indicated with capital letters and end with a question mark (?), for example: “LEARN WIRELESS DEVICE?”. The sub-menus are

indicated with lower case letters and they also end with a question mark, for example “Control Inputs?”. Programmable options are indicated with lower

case letters and do not finish with question mark (?) but Yes/No or other options are offered, for example: “Bypass PA/Fire”. In order to navigate in the

menu system one has to answer to the questions in the main and sub-menus, for example: if the question is “LEARN WIRELESS DEVICE?”, Pressing t

‘YES’ will bring you in the sub-menu “Control Inputs?”. Pressing t (YES) will take you to the programmable options of this submenu. Pressing x “NO’

will take you out of the individual option, and will move you up from one sub-menu to the next sub-menu, or back to the main menu.

LEFT GREEN LED:

After a valid tag is presented, the GREEN

LED will illuminate indicating the power

status.

Tag Area (Where you present your tag to arm/disarm)

Ready LED (Ready to arm)

Alarm LED (Shows alarms)

Tamper LED (Shows tamper alarms)

Alert/Pending (Fault) LED (Shows system faults)