Python 1000 ESP User Manual

20 © 1999 Directed Electronics, Inc. Vista, CA
In order for this system to control one or more after-market actuators, a 451M or two relays (optional) are
needed.
Vehicles without factory power door locks require the installation of one actuator per door. This requires
mounting the door lock actuator inside the door. Other vehicles may only require one actuator installed in the
driver's door if all door locks are operated when the driver's lock is used. This type of installation is required to
operate factory lock systems in Volvo (except 850), SAAB, and most Mazda, Isuzu and Subaru models. The fuse
used on 12-volt inputs should be 7.5A per motor installed in the vehicle.
type D: after-market actuators

Python 1000 ESP Specifications

General

Brand	Python
Model	1000 ESP
Category	Car Alarm
Language	English