34 © 1999 Directed Electronics, Inc. Vista, CA
transmitter configurations
The transmitters can be programmed with the standard or single button arm/disarm configurations by using the
Auto Learn functions in the Transmitter/Receiver Learn Routine.
A remote that uses the standard configuration operates similarly to many factory keyless entry remotes. A stan-
dard configuration transmitter allows arming, disarming, and Panic Mode activation with separate buttons. When
programmed for standard configuration, the transmitter buttons are assigned to the following functions:
. . . . . . . . . . . . operates . . . . . . . . . . Arm only
. . . . . . . . . . . operates . . . . . . . . . . Disarm only
. . . . . . . . . . operates . . . . . . . . . . Channel 2
. . . . . . . . . . . operates . . . . . . . . . . Panic
and . . . . operate . . . . . . . . . . Channel 3
The standard configuration also allows the user to utilize Multi-Level Security Arming (described in the follow-
ing section), a feature that cannot be accessed from a single button arm/disarm configuration transmitter.
When programmed for single button arm/disarm configuration, the transmitter buttons are assigned to the fol-
lowing functions:
. . . . . . . . . . . . operates . . . . . . . . . . Arm/Disarm/Panic
. . . . . . . . . . . operates . . . . . . . . . . Channel 2
. . . . . . . . . . operates . . . . . . . . . . Channel 3
single button arm/disarm configuration
standard configuration
To Next Page
Loading...
Need help?
General
