Python 1000 ESP User Manual

24 © 1999 Directed Electronics, Inc. Vista, CA
internal programming jumper
This jumper is used to determine the light flash output. In the (+) position, the on-board relay is enabled and
the unit will output (+)12V on the WHITE wire, H1/2. In the (-) position, the on-board relay is disabled. The
WHITE wire, H1/2, will supply a 200 mA (-) output suitable for driving factory parking light relays.
light flash jumper

Python 1000 ESP Specifications

General

Brand	Python
Model	1000 ESP
Category	Car Alarm
Language	English