EasyManuals Logo

Python 1000 ESP User Manual

Python 1000 ESP
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
© 1999 Directed Electronics, Inc. Vista, CA 35
multi-level security arming
Multi-Level Security Arming is a feature that allows you to select which of the security system's inputs or sensors
will be active and which will be bypassed at the time that the system is armed. (See Table of Zones section in
this guide.) Pressing the arm button (only on a Standard Configuration transmitter) again within five seconds of
arming the security system will activate the Multi-Level Security Arming feature. Each time the arm button is
pressed again, a different security level is selected. The different security levels can be selected as follows:
Pressing one time: The siren chirps once. The system is armed.
Pressing a second time within five seconds: The siren chirps twice followed by a long chirp. Zone Two is
now bypassed.
Pressing a third time within five seconds: The siren chirps three times followed by a long chirp. Zone Four
is now bypassed.
Pressing a fourth time within five seconds: The siren chirps four times followed by a long chirp. Zones
Two and Four are now bypassed.
Pressing a fifth time within five seconds: The siren chirps five times followed by a long chirp. All input
zones, except the ignition, are now bypassed.
NOTE: Multi-Level Security Arming only applies to a single arming cycle. Once the system is disarmed
and then re-armed, all the zones will be active again.
table of zones
NOTE: The Warn Away® response does not report on the LED.
ZONE NO. TRIGGER TYPE INPUT DESCRIPTION
1 Instant H1/6 BLUE wire. Connect to optional hood/trunk pins.
2 Multiplexed Blue wire of plug-in shock sensor. Inputs shorter than 0.8
seconds will trigger a Warn Away response, while inputs longer
than 0.8 seconds will instantly trigger full alarm sequence.
3 Two-stage, progresses from Door switch circuit. H1/5 GREEN or H1/7 VIOLET.
warning to full alarm
4 Multiplexed Input GREEN wire of plug-in shock sensor. Inputs shorter than 0.8
seconds will trigger a Warn Away response, while inputs longer
than 0.8 seconds will instantly trigger full alarm sequence.
5 Two-stage (similar to doors) Ignition input. H1/9 YELLOW.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Python 1000 ESP and is the answer not in the manual?

Python 1000 ESP Specifications

General IconGeneral
BrandPython
Model1000 ESP
CategoryCar Alarm
LanguageEnglish

Related product manuals