Python Responder LC Model 991 - Heavy Gauge Remote Start, (H3) 10-Pin Connector; Remote Start Input, 5-Pin Connector; Remote Start Auxiliary Output, 5-Pin

12
© 2008 Directed Electronics. All rights reserved.
Heavy gauge remote start, (H3) 10-pin connector
H3/1
PINK (+) IGNITION 1 INPUT/OUTPUT
H3/2
RED/WHITE (+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT 87
H3/3
ORANGE (+) ACCESSORY OUTPUT
H3/4
VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL)
H3/5
GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL WIRE)
H3/6
RED (+) FUSED (30A) IGNITION 1 INPUT
H3/7
PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT
H3/8
PINK/BLACK (+) FLEX RELAY INPUT 87A key side (if required) of FLEX
RELAY
H3/9
RED/BLACK (+) FUSED (30A) ACCESSORY/STARTER INPUT
H3/10
NC (no connec-
tion)
NC
Remote start input, 5-pin connector
1
BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUT
2
VIOLET/WHITE TACHOMETER INPUT WIRE
3
BROWN (+) BRAKE SHUTDOWN INPUT WIRE
4
GRAY N/O or N/C (-) HOOD PIN SWITCH INPUT
5
BLUE/WHITE (-) 200 mA 2ND STATUS/REAR DEFOGGER OUTPUT
Remote start auxiliary output, 5-pin
1
PINK/WHITE (-) 200mA FLEX RELAY CONTROL OUTPUT
2
ORANGE (-) 200mA ACCESSORY OUTPUT
3
VIOLET (-) 200mA STARTER OUTPUT
4
PINK (-) 200mA IGNITION 1 OUTPUT
5
BLUE (-) 200mA STATUS OUTPUT
Note: Wires 1 - 4 on the remote auxiliary outputs are wired to the (-) triggers for