52
© 2008 Directed Electronics. All rights reserved.
module are added to the unit, it may be necessary to use the two-chirp setting
to program this feature OFF.
3-14 Tach Mode Starter Release:
Normal (1)
Increase (2) Decrease (3): Use the
two-chirp setting to increase time by 15% of the original tach programmed time.
Use the three chirp setting to decrease by 15% of the original programmed
time.
3-15 Vehicle temperature auto report: ON (1)
or OFF (2). The default setting is
OFF. When programmed ON the main unit stores the interior temperature of the
vehicle in its temporary memory. When the vehicle’s interior temperature chang-
es 1 degree Celsius, the main unit automatically sends the interior temperature
message to the remote the screen displays the current temperature.
To Next Page
Loading...
Need help?
General
