EasyManuals Logo

QDI Superb 4 Series User Manual

QDI Superb 4 Series
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Manual for S4 series
BIOS Description
Item Option Description
l Swap Floppy Enabled If the system has two floppy drives, choose
Drive Disabled enable to assign physical drive B to logical drive.
l Boot Up Enabled Tests floppy drives to determine whether they
Floppy Seek Disabled have 40 or 80 tracks.
l Boot Up On Select power on state for NumLock.
NumLock Status Off
l Gate A20 Option Normal Let chipset control GateA20 and Normal - a pin
Fast in the keyboard controller controls GateA20.
Default is Fast.
l Typermatic Rate Enabled Keystrokes repeat at a rate determined by the
Setting Disabled keyboard controller - when enabled, the typematic
rate and typematic delay can be selected.
l Typermatic Rate 6~30 The rate at which character repeats when you
(chars/sec) hold down a key.
l Typermatic Delay 250~1000 The delay before keystrokes begin to repeat.
(Msec)
l Security Option Setup Select whether the password is required every
System time the system boot or only when you enter
setup.
l OS Select For Non-OS2 Select OS2 only if you are running OS/2 operating
DRAM>64MB OS2 system with more than 64MB of RAM.
l HDD S.M.A.R.T. Enabled Enable hard disk S.M.A.R.T. support.
Capability Disabled Invalidate this feature.
l Report no FDD Yes Report NO Floppy Disk Drive for WIN 95 to
for WIN 95 release IRQ6.
No Do not report No Floppy Disk Drive for WIN 95.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QDI Superb 4 Series and is the answer not in the manual?

QDI Superb 4 Series Specifications

General IconGeneral
BrandQDI
ModelSuperb 4 Series
CategoryMotherboard
LanguageEnglish

Related product manuals