Manual for S4 series
BIOS Description
Integrated Peripherals
Figure-8 Integrated Peripherals Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
l SIS On-Chip Press Enter Press enter to set On-Chip IDE device.
IDE device
l Internal PCI/IDE Disabled Set the ports of Onboard IDE.
Primary
Secondary
Both
l IDE Primary Mode 0 - 4 Define the IDE primary master/ slave
Master/Slave PIO mode.
PIO Auto The IDE PIO mode is defined by auto -detection.
l IDE Primary Auto Ultra DMA mode will be enabled if an Ultra DMA
Master/Slave device is detected.
UDMA Disabled Disable this function.
lIDE Burst Mode Enabled Enables IDE Burst Mode.
Disabled Disables IDE Burst Mode.
l SIS On-Chip Press Enter Press enter to set On-Chip PCI device.
PCI device
l SIS-7012 Enabled If audio codec was installed on board, the AC97
AC97 Audio audio function can be used.
Disabled Disable the AC97 audio onboard.
To Next Page
Loading...
