QNAP GM-1000 - User Manual

53 pages

To Next Page

To Next Page

Loading...

GM-1000

GM-1001

GM-1002

User Guide

Document Version: 1

01/07/2020

Table of Contents

Questions and Answers

N
Nicholas AndersonAug 11, 2025
What to do if QNAP Network Storage Server has a failed drive in RAID 1, RAID 5, or RAID 6?
- K
  Karen JohnsonAug 11, 2025
  If a drive fails in RAID 1, RAID 5, or RAID 6, access QuTS hero and navigate to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD to find the failed drive. Replace the failed drive with a new hard drive of equal or greater capacity. After physically removing the failed drive from the NAS and waiting for two beeps (approximately 20 seconds), put the new drive into the drive tray and install it. Then, go to Main Menu > Storage & Snapshots > Storage Space, find the volume containing the new drive, and confirm that the status is 'Rebuilding'.
J
Jenny FosterAug 26, 2025
Why Qfinder Pro or myQNAPcloud cannot locate QNAP GM-1000 during QuTS hero installation?
- D
  Denise GarciaAug 26, 2025
  If Qfinder Pro or myQNAPcloud can't find the NAS during QuTS hero installation, the drives or data may be faulty. To resolve this, power off the NAS, remove all drives, power it back on, and use Qfinder Pro or myQNAPcloud to locate the NAS. Once found, reinsert the drives and proceed with the QuTS hero installation.

QNAP GM-1000 Specifications

General

Model	GM-1000
Category	Network Storage Server
Form Factor	Tower
RAM	8 GB DDR4 ECC UDIMM (2 x 4 GB)
Maximum RAM	128 GB
Drive Bays	4 x 3.5-inch SATA 6Gb/s
PCIe Slots	1 x PCIe Gen 3 x4
M.2 Slots	2 x M.2 2280 PCIe Gen 3
RAID Support	RAID 0, 1, 5, 6, 10
Networking	2.5GbE
Network Ports	2 x 2.5GbE RJ45
HDMI Output	1 x HDMI 2.0 (up to 4K @60Hz)
Operating System	QTS
Power Supply	250W
USB Ports	2 x USB 3.2 Gen 2 (Type-A)

Related product manuals

Preview: QNAP TS-130

Preview: QNAP TS-230

Preview: QNAP TS-251+

Preview: QNAP TS-219P+

Preview: QNAP Turbo NAS HS-210

QNAP Turbo NAS HS-210