QNAP GM-1000 User Manual

2. Product Overview
This chapter provides basic information about the QNAP device.
About the GM-1000
The GM-1000 is a ZFS NAS designed to provide efficient data backup and hybrid cloud solutions for
enterprises. The dual NAS comprises two replaceable nodes, where the GM-1001 has a 3.6 GHz for each
CPU base frequency and the GM-1002 has a 3.4 for each CPU base frequency. The enclosure also contains
sixteen 3.5-inch drive bays where a single node controls eight SATA drives on the front, two U.2 and SATA
drives on the back, and two NVMe M.2 SSDs on the system board. Each node is equipped with two 2.5
Gigabit Ethernet ports and two 10 Gigabit Ethernet ports, making the GM-1000 ideal for bandwidth-
demanding applications.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
• For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Note
• The hardware specifications table is separated into components found on the
enclosure, the node, and the system.
• The components presented in the node applies to a single node.
Ordering P/N Enclosure Node CPU Memory
GM-1001 1 x TEC-2N16-770W 2 x TNS-h1083X-
E2234-8G
Intel® Xeon®
E-2234
8 GB
GM-1002 2 x TNS-h1083X-
E2236-16G
Intel® Xeon®
E-2236
16 GB
Component GM-1001 GM-1002
Enclosure
Name TEC-2N16-770W
Storage
GM-1000 User Guide
Product Overview 4

QNAP GM-1000 Specifications

General

Brand	QNAP
Model	GM-1000
Category	Network Storage Server
Language	English