QNAP GM-1000 - Page 6

Component GM-1001 GM-1002
Drive bays 16 x 3.5-inch SATA 6 Gbps
Note
One node controls eight drives.
Drive compatibility 3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
Interface
Buttons • Power
• OLED
Others
Power supply unit 2 x 770W, 100-240V AC, 50-60 Hz
Node
Note
The components in this section apply to a single node.
Name TNS-h1083X-E2234-8G TNS-h1083X-E2236-16G
Processor
CPU Intel® Xeon® E-2234 Intel® Xeon® E-2236
Frequency 4-core 3.6 GHz base/4.8 GHz
burst
6-core 3.4 GHz base/4.8 GHz
burst
Architecture x86 64-bit
Encryption engine AES-NI
Memory
Pre-installed memory 8 GB RAM: 2 x 4 GB UDIMM
DDR4
16 GB RAM: 2 x 8 GB UDIMM
DDR4
Memory slots 4 x Long-DIMM DDR4
Important
• Use only QNAP memory modules to maintain
system performance and stability. For NAS
devices with more than one memory slot, use
QNAP modules with identical specifications.
• Using unsupported modules may degrade
performance, cause errors, or prevent the
operating system from starting.
Maximum memory 128 GB RAM: 4 x 32 GB
Flash memory 5 GB (dual-boot OS protection)
Storage
GM-1000 User Guide
Product Overview 5