QNAP GM-1000 User Manual

b. Go to Main Menu > Storage & Snapshots > Overview > Storage > System .
c. Verify that the expansion units are listed.
Connecting USB Expansion Units
To connect the GM-1000 to USB expansion units, USB Type-A to USB Type-C cables are required. For
required accessories details, see Installing Expansion Units.
1. Connect the expansion unit to the NAS.
a. Connect the USB cable to a USB 3.2 Gen 1 Type-A port on the NAS.
2. Power on the expansion units.
3. Verify that the expansion units are recognized by the NAS.
a. Log on to QuTS hero as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > Storage > System .
c. Verify that the expansion units are listed.
QuTS hero Installation
The GM-1000 uses the QNAP QuTS hero operating system. You can install QuTS hero using any of the
following methods:
GM-1000 User Guide
Installation and Configuration 42

QNAP GM-1000 Specifications

General

Brand	QNAP
Model	GM-1000
Category	Network Storage Server
Language	English