2. Product Overview
This chapter provides basic information about the QNAP TBS-453DX NAS.
About the TBS-453DX
The TBS-453DX is a compact NAS powered by an Intel
®
Celeron
®
J4105 4-core 1.5 GHz processor and
supports up to 8 GB of DDR4 memory. It has both a Gigabit and 10 Gigabit Ethernet port for enhanced
connectivity and provides multimedia support through its HDMI connection. In addition to its four M.2 SATA
SSD slots, the TBS-453DX features USB One Touch Copy for easy and efficient data transfer.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Component TBS-453DX
Ordering Information
Ordering P/N • TBS-453DX-4G
• TBS-453DX-8G
Processor
CPU Intel® Celeron® J4105
Frequency 4-core/4-thread 1.5 GHz base/2.5 GHz burst
Architecture x86 64-bit
Encryption engine AES-NI
Memory
Pre-installed memory • 4 GB RAM: 2 x 2 GB SODIMM DDR4
• 8 GB RAM: 2 x 4 GB SODIMM DDR4
Memory slots 2 x SODIMM DDR4
Important
• Use only QNAP memory modules to maintain
system performance and stability. For NAS
devices with more than one memory slot, use
QNAP modules with identical specifications.
• Using unsupported modules may degrade
performance, cause errors, or prevent the
operating system from starting.
Maximum memory 8 GB RAM: 2 x 4 GB
Flash memory 4 GB eMMC
Storage
TBS-453DX User Guide
Product Overview 4
To Next Page
Loading...
