EasyManua.ls Logo

QNAP TS-1677X Series - Drive Bay Numbering and Setup Requirements

QNAP TS-1677X Series
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front Drive Numbering
Installation Requirements
Category Requirement
Environment Install the NAS in an environment that meets the following criteria:
Room temperature: 0 to 40˚C (32 to 104˚F)
Non-condensing relative humidity: 5 to 95%
Wet-bulb temperature: 27˚C (80.6˚F)
Flat, anti-static surface with no exposure to direct sunlight, liquids,
and chemicals
Free from objects that may obstruct NAS ventilation or apply
pressure to the NAS or power cord
Restricted access location
Access can only be gained by service persons or users who
have been instructed about the reasons for the restrictions
applied to the location and about any precautions that shall be
taken.
Access is through the use of a tool, or lock and key, or other
means of security, and is controlled by the authority
responsible for the location.
Hardware and peripherals Storage drives
Network cable
Tools Phillips #1 or #2 screwdriver
Anti-static wrist strap
TS-1677X User Guide
Product Overview 11

Related product manuals