10. Connect all cables and external attachments.
11. Connect the power cord to the electrical outlet.
12. Power on the NAS.
QTS Installation
The TS-1677X uses the QNAP QTS operating system. You can install QTS using any of the following
methods.
Method Description Requirements
Qfinder Pro installation
(Recommended)
If the NAS is connected to your
local area network, you can do the
following:
• Locate the NAS using Qfinder
Pro.
• Complete the steps in the
Smart Installation Guide
wizard.
• Computer
• Network cable
• Qfinder Pro installer
TS-1677X User Guide
Installation and Configuration 35
To Next Page
Loading...
Need help?
General
