2. Product Overview
This chapter provides basic information about the QNAP TS-230 NAS.
About the TS-230
The TS-230 is a user-friendly lightweight NAS designed for backup, synchronization, remote access, and
home entertainment. The TS-230 offers smooth and seamless data transmission for multiple users. It is
powered by a Realtek RTD1296 quad-core ARM Cortex A53 processor with 2 GB DDR4 memory. Its toolless
tower design makes it an ideal NAS for homes and small offices.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Ordering P/N CPU Memory Power supply
TS-230 Realtek RTD1296 ARM
Cortex-A53
2 GB Single
Component TS-230
Processor
CPU Realtek RTD1296 ARM Cortex-A53
Frequency 4-core/1.4 GHz
Architecture ARM 64-bit
Encryption engine AES-256
Memory
Pre-installed memory 2 GB RAM DDR4 (non-expandable)
Note
The TS-230 reserves some RAM for shared graphics
memory.
Flash memory 4 GB (Dual-boot OS protection)
Storage
Drive bays 2 x 3.5-inch SATA 6 Gbps
Note
The 3.5-inch SATA drive bays are backward compatible
with SATA 3 Gbps drives.
TS-230 User Guide
Product Overview 4
To Next Page
Loading...
