QNAP TS-332X User Manual

d. Attach the screws to the back of the NAS.
e. Place the NAS in its normal upright position.
10. Connect all cables and external attachments.
11. Connect the power cord to the electrical outlet.
12. Power on the NAS.
13. Verify that the module is recognized by the NAS.
a. Log on to QTS as administrator.
b. Go to Control Panel > System > System Status > Hardware Information .
TS-332X User Guide
Installation and Configuration 34

QNAP TS-332X Specifications

General

Brand	QNAP
Model	TS-332X
Category	Network Storage Server
Language	English