2. Product Overview
This chapter provides basic information about the QNAP TS-332X NAS.
About the TS-332X
The TS-332X is equipped with an AL-324 quad-core 1.7 GHz ARM® Cortex-A57 processor and can support
up to 16 GB of DDR4 memory. The TS-332X features USB One Touch Copy for seamless backup and
synchronization. In addition to its two Gigabit Ethernet ports, the TS-332X has an additional 10 Gigabit
Ethernet port for enhanced connectivity and comes with three M.2 SSD slots for improved data
management.
Hardware Specifications
Important
Modifying the hardware or software of your QNAP product invalidates the warranty. QNAP
is not responsible for any damage or data loss caused by unauthorized modifications and
installation of unsupported third-party applications.
Component TS-332X
Ordering Information
Ordering P/N • TS-332X-2G
• TS-332X-4G
Processor
CPU Annapurna Labs Alpine AL-324
Frequency 4-core 1.7 GHz
Architecture 64-bit ARM
Encryption engine AES-256
Memory
Pre-installed memory • 2 GB RAM: 1 x 2 GB DDR4
• 4 GB RAM: 1 x 4 GB DDR4
Important
• Use only QNAP memory modules to maintain
system performance and stability. For NAS
devices with more than one memory slot, use
QNAP modules with identical specifications.
• Using unsupported modules may degrade
performance, cause errors, or prevent the
operating system from starting.
Total memory slots 1 x SODIMM DDR4
Maximum memory 16 GB RAM: 1 x 16 GB
Flash memory 512 MB NAND
Storage
Drive bays 3 x 3.5-inch SATA 6 Gbps
TS-332X User Guide
Product Overview 4
To Next Page
Loading...
Need help?
General
