Setting Up the NAS
Important
Read all safety requirements and information carefully before setting up the NAS or
installing NAS components.
1. Place your NAS device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install drives.
For details, see Installing 2.5-inch Solid-state Drives on 2.5-inch Trays.
3. Optional: Connect expansion units.
For details, see Connecting USB Expansion Units.
4. Connect the power cord and all applicable cables.
5. Power on the NAS.
6. Install QTS.
For details, see QTS Installation.
7. Log on to QTS.
TS-410E User Guide
Product Overview 10
To Next Page
Loading...
