QNAP TS-410E User Manual

2. Product Overview
This chapter provides basic information about the QNAP TS-410E NAS.
About the TS-410E
The TS-410E is a fanless NAS powered by an Intel® Celeron® J6412 quad-core 2.0 GHz processor. The NAS is
equipped with four hot-swappable SATA 6 Gbps drive bays that support solid-state drives, and four USB 3.2
Gen 2 Type-A ports. It also supports up to two expansion units.
The fanless design is suitable for sound-sensitive environments and is adaptable to the needs of data
centers as well as small and medium-sized businesses.
Hardware Specications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specications are subject to change without prior notice. To see the latest
specications, go to https://www.qnap.com.
Ordering P/N Drive bays Memory
TS-410E-8G 4 8 GB
Component TS-410E
Processor
CPU
Intel
®
Celeron
®
J6412
Frequency 4-core/4-thread 2.00 GHz base/2.60 GHz turbo
Architecture x86 64-bit
Encryption engine AES-NI
Graphics
Intel
®
UHD Graphics
Memory
Maximum memory 8 GB onboard (non-expandable)
Flash memory 4 GB eMMC
Storage
Drive bays 4 x 2.5-inch SATA 6 Gbps
Tip
The drive bays are backward compatible with SATA 3 Gbps
drives.
TS-410E User Guide
Product Overview 4

QNAP TS-410E Specifications

General

Brand	QNAP
Model	TS-410E
Category	Storage
Language	English