QNAP TS-855eU - Installation and Configuration; Hardware Installation; Drive Installation

2. Installation and Conguration
This chapter provides specic hardware and rmware installation and conguration steps.
Hardware installation
This section provides information on installing drives, memory modules, expansion cards, power supply
units, expansion units, and rail kits.
Drive installation
The TS-855eU is compatible with 3.5-inch and 2.5-inch hard drives, and 2.5-inch solid state drives.
Installing 2.5-inch solid-state drives
Tip
For the list of compatible drive models, go to https://www.qnap.com/compatibility.
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power o the NAS.
2. Remove the drive tray.
a. Pull the tray handle outward.
b. Pull the tray out.
TS-855eU User Guide
Installation and Conguration 13