QNAP TS-855eU - Initializing QTS Using Qfinder Pro

Warning
QTS and QuTS hero use dierent le systems. Switching operating systems will reset the
NAS and delete all data.
Method Description Requirements
Qnder Pro
installation
(Recommended)
If the NAS is connected to your local area
network, you can do the following:
• Locate the NAS using Qnder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see Initializing QTS using
Qnder Pro.
• Computer
• Network cable
• Qnder Pro installer
Cloud installation If the NAS is connected to the internet,
you can do the following:
• Scan the QR code on the NAS.
• Log into your myQNAPcloud account.
• Use myQNAPcloud Link to remotely
access your NAS.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see Initializing QTS using the
cloud installation website.
• Computer or mobile device
• Network cable
• myQNAPcloud account
• Cloud Key
Initializing QTS using Qnder Pro
You can initialize QTS using Qnder Pro, which is an utility designed to help you locate and manage QNAP
devices on your network.
Warning
Initializing QTS deletes all data on the drives. Back up your data before proceeding.
1. Power on the NAS.
2. Connect the NAS to your local area network.
3. Run Qnder Pro on a computer that is connected to the same local network.
Tip
To download Qnder Pro, go to https://www.qnap.com/utilities.
4. Click Next.
The QNAP Warranty Service page opens in the default web browser.
5. Click Check warranty.
The QNAP Warranty Service window opens in a new web page.
Important
You can check your device warranty policy or purchase an extended warranty plan at QNAP
Warranty Service.
TS-855eU User Guide
Installation and Conguration 39