EasyManuals Logo

QNAP TS-977XU-RP User Manual

QNAP TS-977XU-RP
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
Duration Frequency Description
Long beep (1.5 seconds) 3 (every 5 minutes) A power error occurred.
The system fan is not functioning.
The fan module has been removed.
The NAS data cannot be copied to the
external storage device connected to the
front USB port.
2 The storage pool is about to reach full
capacity.
The storage pool has reached full
capacity.
A storage pool status error occurred.
The shared folder is about to reach its full
capacity.
The shared folder has reached its full
capacity.
The drives are in degraded mode.
The drive is rebuilding.
The USB device is being removed (USB
one-touch copy button).
A shared folder status error occurred.
A drive is plugged in or out.
The iSCSI is about to reach full capacity.
1 The NAS was powered off by force
shutdown (hardware shutdown).
The NAS was powered on successfully
and is ready.
Long and short beeps 1 long and 2 short
beeps
The JBOD expansion unit has been removed.
TS-x77XU User Guide
Basic Operations 41

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-977XU-RP and is the answer not in the manual?

QNAP TS-977XU-RP Specifications

General IconGeneral
BrandQNAP
ModelTS-977XU-RP
CategoryNetwork Storage Server
LanguageEnglish

Related product manuals