QNAP TS-h1683XU-RP User Manual

3. Power on the expansion units.
4. Verify that the expansion units are recognized by the device.
5. Log on to QuTS hero as administrator.
6. Go to Main Menu > Storage & Snapshots > Overview > System .
7. Verify that the expansion units are listed.
Connecting SATA JBOD Expansion Units
To connect the TS-hx83XU-RP to SATA JBOD expansion units, a host bus adapter must be installed on the
NAS.
For required accessories details, see Expansion Unit Installation.
1. Power o the NAS.
2. Install a host bus adapter on the PCIe slot.
TS-hx83XU-RP User Guide
Installation and Conguration 34

QNAP TS-h1683XU-RP Specifications

General

Brand	QNAP
Model	TS-h1683XU-RP
Category	Storage
Language	English