2. Installation and Conguration
This chapter provides specic hardware and rmware installation and conguration steps.
Hardware Installation
This section provides information on installing drives, replacing memory modules, installing expansion
cards, and connecting expansion units.
Drive Installation
The NAS is compatible with 3.5-inch and 2.5-inch hard drives, 2.5-inch solid-state drives, and M.2 solid-state
drives.
Installing 2.5-inch Drives on 3.5-inch Trays
Warning
• Installing a drive deletes all data on the drive.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power o the NAS.
2. Remove the front cover.
a. Locate the locking mechanism on the left side of the NAS.
b. Slide the lock up to release the front cover.
TS-x62, TS-x64 User Guide
Installation and Conguration 18
To Next Page
Loading...
Need help?
General
