QNAP TS-x62 User Manual

Warning
• Only qualied personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power o the NAS.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove the front cover.
a. Locate the locking mechanism on the left side of the NAS.
b. Slide the lock up to release the front cover.
c. Slide the front cover to the left and then pull.
TS-x62, TS-x64 User Guide
Installation and Conguration 33

QNAP TS-x62 Specifications

General

Brand	QNAP
Model	TS-x62
Category	Storage
Language	English