QNAP Turbo NAS TS-112 User Manual

28
4. Remove the case cover of the NAS gently.
5. Lift up the Mylar sheet. Locate the memory slot. Make sure the slot is empty.
6. Grasp the edge of the memory module. Align the notch on the gold edge of the
module with the notch in the memory slot. Slide the memory module to the slot at a
45-degree angle (approximately).
7. Gently press the memory module into the slot until it is seated fully.

QNAP Turbo NAS TS-112 Specifications

General

Brand	QNAP
Model	Turbo NAS TS-112
Category	Storage
Language	English