QNAP Turbo NAS TS-112 User Manual

61
10.2 TS-469U-RP/SP
The following instructions should only be performed by an authorized and trained
technician.
Follow the steps below to replace a failed power supply unit on the TS-469U-RP/SP.
1. Turn off the NAS.
2. Press the green lever and remove the defective power supply unit.
3. Insert a new power supply unit and push it to the end.
4. Turn on the NAS.

QNAP Turbo NAS TS-112 Specifications

General

Brand	QNAP
Model	Turbo NAS TS-112
Category	Storage
Language	English