QNAP TVS-73e Series User Manual

3.
Run Qfinder Pro on a computer that is connected to the same local area
Note
To download Qfinder Pro, go to
4.
Locate the NAS in the list and then double
The
Smart Installation Guide
5. Perform any of the following
actions.
• To
check for the latest available version, click
The wizard downloads the latest available version, and then the NAS restarts after the download
is complete. If a newer version is not available, the wizard automatically displays the
Installation Guide.
• To install the out-of-the-
box version, click
6. Click Start Smart Installation
7. Specify the following
information.
• NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (
• Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
8. Click Next.
9.
Specify the time zone, date, and
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
10. Click Next.
11. Select
Obtain an IP address automatically
12. Click Next.
13.
Select the types of devices that you will use to access shared folders on the
14. Click Next.
15. Select Configure disks later.
Note
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
16. Configure the disk settings.
a. Select a volume type.
b.
Select the disks that you want to use to create a RAID
c. Optional: Select a RAID
type.
Installation and Configuration
Run Qfinder Pro on a computer that is connected to the same local area
network.
To download Qfinder Pro, go to
https://www.qnap.com/utilities.
Locate the NAS in the list and then double
-click the name or IP address.
Smart Installation Guide
opens in the default web browser.
actions.
check for the latest available version, click
Start.
The wizard downloads the latest available version, and then the NAS restarts after the download
is complete. If a newer version is not available, the wizard automatically displays the
box version, click
Skip.
Guide.
information.
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (
-), but cannot end with a hyphen.
: Specify an administrator password with 1 to 64 characters. The password supports all
Specify the time zone, date, and
time.
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
Obtain an IP address automatically
(DHCP).
Select the types of devices that you will use to access shared folders on the
NAS.
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
Select the disks that you want to use to create a RAID
group.
type.
TVS-x73e User Guide
Installation and Configuration
31
network.
The wizard downloads the latest available version, and then the NAS restarts after the download
is complete. If a newer version is not available, the wizard automatically displays the
Smart
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
: Specify an administrator password with 1 to 64 characters. The password supports all
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
NAS.
For details on configuring disks, see the Storage Manager section of the QTS User Guide.

QNAP TVS-73e Series Specifications

General

Brand	QNAP
Model	TVS-73e Series
Category	Storage
Language	English