20
Group Key Life Time
Enter the number of seconds that will elapse before the
group key change automatically. The default is 86400
seconds.
Enable Pre-Authentication
The two most important features beyond WPA to become
standardized through 802.11i/WPA2 are: pre-
authentication, which enables secure fast roaming without
noticeable signal latency.
Preauthentication provides a way to establish a PMK
security association
efore a client associates. The
advantage is that the client reduces the time that it's
disconnected to the network.
Authentication RADIUS
Server
Port: Enter the RADIUS Server’s port number provided by
your ISP. The default is 1812.
IP Address: Enter the RADIUS Server’s IP Address
provided by your ISP.
Password: Enter the password that the AP shares with the
RADIUS Server.
Apply Change
Press to save the new settings on the screen.
Reset
Press to discard the data you have entered since last time
you press Apply Change.
UAccess Control
When Enable Wireless Access Control is checked, only those clients whose wireless
MAC addresses listed in the access control list can access this Access Point. If the list
contains no entries with this function being enabled, then no clients will be able to access
this Access Point.
To Next Page
Loading...
Need help?
General