QSC TouchMix-8 - Wizards; FX Wizard

81
1001108-01-F
Wizards
FX W
The FX Wizard aids in selecting and routing effects.
1. FX1 - 6 tabs – Selects one of six
FX processors. (Four on TouchMix-8 and
TouchMix-16)
NOTE: The Source, Type, and FX
Preset windows provide a means of
selecting an Effect based on what the
source is. If any of the lists fill the window,
flick up on the list to show moreselections.
2. Source list – Use the Source window to
select the source instrumentcategory.
3. Type list – Use the Type windows to select
the specific type of instrument. This narrows
the selection to a list of recommended presets
appropriate for the application.
4. FX Preset list – Use the FX Preset window
to select the Effect andvariation. For example,
in the FX Preset window the letter “D” refers to
the Dense Reverb Effect, and the text following
the letter indicates the Preset (variation) of the
DenseReverb.
5. Recall button – Loads selected effect.
6. Clear button – Unassigns all the inputs
andoutputs.
7.
Select inputs to feed Label – Each input channel is represented by a button. Touch one or more of these
buttons to apply the effect to an input.
8. Cue button – Touch Cue above the FX fader to hear the output of the selected effect on the Cue system.
9. Select Aux Output buttons – Each Aux Output is represented by a button. Touch one or more of these buttons to send the
effect to the associated Aux Output.
Press Wizard
Touch
FX Wizard
Wizard
FX Wizard