If the matched files are more than 8, you can use “Page No.” to select
page (use numeric keys or [Ç] [È] keys to select page). In the file list
box, use [Ç] or [È] keys to move the scroll bar to the file, press [ENTER]
key to playback the file. If the second channel is selected, these two
channels can be playback synchronously.
If DVR can not find the matched files, a failure dialog box will be pop-up.
2. Playback by Time: In the playback interface, select channel number,
record type and time section, move “Active Frame” to “Play” button, press
[ENTER] key, DVR will start to playback based on time section.
3. Search by Card No and Playback file: In the playback interface,
select channel number, record type, enable card No. search option (“9”)
and input the card number, move “Active Frame” to “Search” button,
press [ENTER] key, DVR will search and list the matched files. If the
matched files are more than 8, you can use numeric keys or [Ç] [È] keys
to select page. Use [Ç] [È] keys to move scroll bar to the file, press
[ENTER] key to playback the selected file. If DVR can not find the matched
files, a message dialog will be pop-up.
To Next Page
Loading...
General