Step 3: Select backup device
Please confirm the backup device: USB flash memory, USB HDD, USB CD-
R/W or IDE CD-R/W, and select the corresponding backup device.
Step 4: Start and finish backup
Move “Active Frame” to “Copy” button and press [ENTER] key to start
backup.
When backup is started, corresponding message box will pop-up to
indicate the result.
Backup video segment
You also can backup the image segments when the image is being
playback. The steps are:
1) Enter into the interface of playback the files or playback by time;
2) Press [EDIT] key to start selecting the current playback image, and
press [EDIT] again to stop selecting. This segment is selected;
3) You can repeat step 2 to select many segments. 30 segments can
be selected in all;
4) After you select all segments, press [ESC] key, a message window
will pop-up. If you press “Confirm” button, DVR will start to backup
the selected segments. If you press “Cancel” button, DVR will abort
backup.
Note: The backup function is effective when two channels are playback
synchronously. In such case, each channel can backup 30 segments so 60
segments can be backup for two channels.
Playback the video segment
You can use our file player software to playback the video segment in PC.
You can find the player software in attached CD. (In the installation folder
C:\Program Files\Quaddrix NetDVR\Player.exe)
Exit playback interface
Please refer to chapter 4.6.
To Next Page
Loading...
General