are: All Time, Motion Detect, Alarm, Motion&Alarm and Motion|Alarm.
Note: The time periods in one day can not be repeated.
Step 4: Copy to other days
You can repeat step2 and step3 to setup for other days. Also you can
copy the current day to other days.
Step 5: Save
Press “Confirm” back to “Recording” menu. Press “Confirm” again to
save the parameters and return main menu.
Note:
1) If record type is “Motion Detect” or other related types, you
must setup “Motion Detection” in order to trigger motion
recording (refer to chapter 5.10).
2) If record type is “Alarm” or other related types, you must setup
“Alarms” in order to trigger alarm recording (refer to chapter
5.13).
3) The time period is among 00:00—24:00.
To Next Page
Loading...
General