ID is 2, the DVR PTZ address is set as ID 3.
Preset setup: Preset is using one number to represent the camera’s
position, zoom, focus and iris. Move “Active Frame” to “Setup” button on
the right side of “Preset” item, press [ENTER] key to enter into preset
setup menu. You can save 128 preset numbers. Please make sure the PTZ
support preset function before you setup preset.
Sequence setup: Each sequence is made up of several cruise points.
Each cruise point includes one preset number, dwell time and dwell speed.
Please make sure the PTZ you are using can support sequence function
before you start to setup. You can save 16 sequence.
Cruise setup: Cruise is remembering the track of PTZ movement. Please
make sure the PTZ you are using can support cruise function.
Preset setup
In “PTZ” menu, move “Active Frame” to “Setup” button on the right side
of “Preset” item, press [ENTER] , you can enter into “Preset” setup menu:
Add preset number: You can input preset number (among 1-128) in the
edit box. Then press “Adjust” button to enter into PTZ control interface. In
PTZ control interface, you can use direction keys to adjust PTZ position,
To Next Page
Loading...
General