quadient LAN Installation Guide

10
1
Step A – Preparing the Mailing System
A1 – Installing Postage Meter (PSD)
The Meter contains accounting and credit information.
1.3 Step A – Preparing the Mailing
System
Do not connect the Power Supply to the System before
instructed.
You may damage equipment .
• Turn the Mailing System on its back.
• Open the PSD cover located under
the Mailing System.
• Remove PSD from the packaging.
• Write down PSD No: (N33xxxxxx).
You will need it at step C .
• Insert PSD into the Mailing System,
by positioning it vertically, with the
contacts down and facing to the rear,
and the labels towards you.
• Close PSD cover.
ALPHA1_IR.book Page 10 Vendredi, 16. décembre 2011 11:49 11

quadient LAN Specifications

General

Brand	quadient
Model	LAN
Category	Postal Equipment
Language	English