30 Initial Configuration
DXi6701/DXi6702 Installation and Configuration Guide
Caution: For effective bonded network use, a properly configured network
switch is required. (A network switch is not supplied with the DXi6701/
DXi6702.) The DXi6701/DXi6702 bonding settings must match the
switch settings. If the switch settings and the DXi6701/DXi6702
settings do not match, your system may become inaccessible through
the switch.
Note: The figure below is for illustrative purpose only. The Network page will
reflect the actual number of physical ports in the system.
To Next Page
Loading...
Need help?
General