Initial Configuration 39
DXi6701/DXi6702
Figure 27 VTL Wizard: About
Step 2: Add Partition
1 Enter information about the partition (see Figure 28):
• Name - Enter the name of the VTL partition.
• Library Model - Select the library model emulated by the partition. The library
model determines the inquiry string returned to the host by the DXi6701/
DXi6702.
The following library models are available:
• Quantum DXi7500
• ADIC Scalar 100, ADIC Scalar i2000, or ADIC Scalar i500
• ADIC Pathlight VX
• Quantum Scalar i40/i80 or Quantum Scalar i6000
• Quantum DXi6700 or Quantum DXi8500
• Quantum DX3000 or Quantum DX5000
• Quantum PX500 or Quantum PX720
• ATL M2500, ATL P1000, or ATL P7000
If you select a library such as the ATL P1000 or ATL P7000, the DXi6701/DXi6702
appears as the selected library to the host and backup application. If you select
Quantum DXi6701/DXi6702, the host and backup application recognize the
device as a Quantum DXi6701/DXi6702.
Note: Quantum recommends that you set the library model to Quantum
DXi6701/DXi6702 for best compatibility. If your backup application
does not support the Quantum DXi6701/DXi6702 inquiry string, select
a different library model. Check your software compatibility guide to
verify what library models are supported.
To Next Page
Loading...
