Scalar i2000 Basic SNMP Reference Guide 7
Library Identification
The two MIB variables below are available in the ADIC Intelligent Storage MIB from the
productAgentInfoGroup. The productAgentInfoGroup is a group of scalar objects that contains information
about the library as a whole. All objects in productAgentInfoGroup have instance ID “.0”. Unless otherwise
noted, all variables are defined in the ADIC Management MIB.
Product Name
OID: 1.3.6.1.4.1.3764.1.1.10.3
Name: productName (defined in the ADIC Intelligent Storage MIB)
Type: DisplayString
Values: Indicates the type of library.
Instance: There is one instance for this variable and it is unique for the entire library. Quantum recommends
querying the Product Name so that the framework application will list the type of library being monitored.
Logical Library Name
OID: 1.3.6.1.4.1.3764.1.1.200.20.90.20.1.3
Name: name
Type: DisplayString
Values: Returns the logical library name. Logical library is another name for a library partition.
Instance: There will be one instance for each partition configured on the library. Query the specific instance
that you need to access.
Logical libraries are listed using the format:
• 8.0.0.0.0.0.1.0.59.1
The final number (1 in this instance) is the partition number.
To determine the number of partitions, query the MIB variable:
• 1.3.6.1.4.1.3764.1.1.200.20.90.10.1.2
Query Logical Library Name so that the framework application will list the specific partition that is
monitored.
To Next Page
Need help?
General