10 Library Status and Health
The numbers associated with the aisle, frame, rack, section, column, and row combine to form a location
coordinate. For more about the library location coordinates and how they can tell you where a drive is
located in the physical library, refer to the Scalar i2000 User’s Guide.
Alerted by Trap: 403
Drive Overall Health
OID: 1.3.6.1.4.1.3764.1.1.200.20.80.110.1.31
Name: phDriveRasStatus
Type: INTEGER
Values: good(1), failed(2), degraded(3), warning(4), informational(5), unknown(6), invalid(7)
Description: The overall health of the drive is indicated by the phDriveRasStatus object.
Instance: There will be one instance for every physical drive in the library. Query the specific instance that
you need to access. Drives are listed in sequential order. See Table 1
on the previous page for details on
interpreting the format of a drive instance ID.
Alerted by Trap: 403
Physical Library Online/Offline State
OID: 1.3.6.1.4.1.3764.1.1.200.20.80.10.1.5
Name: onlineStatus
Type: INTEGER
Values: online(1), offline(2), shutdown(3)
Description: The online/offline state of the entire library is returned by the onlineStatus object.
Instance: There will be one instance for the Scalar i2000, 8.0.0.0.0.0.1.0.59.
Alerted by Trap: 101
Robotics Readiness
OID: 1.3.6.1.4.1.3764.1.1.200.20.80.10.1.6
Name: readiness
Type: INTEGER
Values: ready(1) or notReady(2).
Description: The readiness state of the library robotics is returned by the readiness object.
Instance: There will be one instance for the Scalar i2000, 8.0.0.0.0.0.1.0.59.
Alerted by Traps: 110, 111
To Next Page
Loading...
Need help?
General