Scalar i2000 Basic SNMP Reference Guide 1
About This Guide and Your Product
This reference guide describes the basic usage of the Simple Network Management Protocol (SNMP) to
acquire alert information from the Scalar® i2000 library. Focus is placed on the most critical information
available through Traps and Management Information Base (MIB) queries. For information about the Scalar
i2000 library, itself, refer to the Scalar i2000 User’s Guide. For information on integrating MIBs into a SNMP
management application, contact your software vendor.
The information presented in this document represents the most commonly requested MIB objects and
SNMP Traps needed to monitor the Scalar i2000 from a network management tool. For more information
about the Scalar i2000 MIBs, contact technical support.
This basic SNMP reference is written for library customers, partners, third party management software
developers, and other parties interested in integrating the Scalar i2000 library with commercial management
frameworks.
This document assumes the reader has a working knowledge of SNMP. The reader should be able to
compile a MIB on their specific framework application, perform SNMP GET operations, as well as
understand how to collect Traps and filter them for information.
Explanation of Symbols and Notes
The following symbols appear throughout this document to highlight important information.
INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF NOT
AVOIDED, COULD RESULT IN DEATH OR BODILY INJURY.
Indicates a situation that may cause possible damage to equipment, loss of
data, or interference with other equipment.
Indicates important information that helps you make better use of your system.
To Next Page
Loading...
Need help?
General