To Next Page

To Previous Page

Scalar i2000 Basic SNMP Reference Guide 13

SNMP Traps

This section describes the basic set of SNMP system status traps issued by the Scalar i2000. These traps

present the physical library point of view, not that of a particular partition.

ADIC Intelligent Storage MIB

Traps defined in the Intelligent Storage MIB are issued with enterprise OID “intelligent”, which resolves to

1.3.6.1.4.1.3764.1.1.

Trap # 500: startupSequenceCompleted

This trap indicates that the library has completed its boot sequence.

Trap # 501: shutdownSequenceInitiated

This trap indicates that the library has started its shutdown sequence, which includes reboot and shutdown.

ADIC Management MIB

These informational traps are defined in the ADIC Management MIB. Each is issued with enterprise OID

“management”, which resolves to 1.3.6.1.4.1.3764.1.1.200.20.

Trap # 101: physLibraryOnlineStatusChange

This trap is issued when the physical library is brought online or taken offline.

Trap # 102: physLibraryDoorStatusChange

This trap is issued when the physical library door has been opened, closed, closed and locked, closed and

unlocked, or when the controller has failed.

Trap # 103: ieStationDoorStatusChange

This trap is issued when an I/E station door has been opened, closed, locked or unlocked.

Trap # 110: rcuReady

This trap is issued whenever the i2000’s robotics transitions from the “not ready” state to the “ready” state.

Quantum Scalar i2000 Reference Guide

Other manuals for Quantum Scalar i2000