Scalar i2000 Basic SNMP Reference Guide 19
Variables and Traps Quick Reference
Use the two tables in this appendix to quickly see the MIB variables and Traps described in this document.
Table 4 Status MIB Variables
Because the front portion of the MIB variable object ID (OID), 1.3.6.1.4.1.3764.1.1, is the same for all
variables defined in the ADIC MIBs, it is omitted in the OID column to save space. For example, the actual
OID of the Drive Online/Offline Status variable is: 1.3.6.1.4.1.3764.1.1.200.20.80.110.1.29.
Event OID Description
Drive Online / Offline
Status
...200.20.80.110.1.29 Indicates if the drive is online or offline. Use the
LMC to confirm the drive is varied on. Also,
check power.
Drive Overall Health ...200.20.80.110.1.31 Indicates the overall status of the drive. If the
drive has a health status other than good, use
the LMC to determine what RAS tickets have
been generated for the drive.
Physical Library Online /
Offline Status
...200.20.80.10.1.5 Indicates if the library is online or offline. Use
the LMC to confirm the library is online and not
being configured.
Robotic Readiness ...200.20.80.10.1.6 Indicates the status of the library robotics. Make
sure the module door(s) are closed and the
robotics are online.
Library Main Door ...200.20.80.10.1.16 Indicates if the front door(s) of the library
modules(s) are closed and locked.
IE Station Door Status ...200.20.80.75.1.2 Indicates if a specific IE station door is closed
and locked.
Logical Partition Online /
Offline Status
...200.20.90.20.1.12 Indicates if a specific partition is online or
offline. Use the LMC to confirm the partition is
online and not being configured.
RAS Subsystem Status ...200.20.100.10.1.2 Indicates the status of a particular subsystem of
the library. If the value returned is anything but
good, use the LMC to determine what events
have been logged in the RAS ticket system.
To Next Page
Loading...
Need help?
General