Quantum Scalar i500 Reference Guide

Scalar i500 Basic SNMP Reference Guide 99
STATUS current
DESCRIPTION "Device firmware level as would be reported in
a SCSI Inquiry command."
::= { physicalDriveEntry 7 }
phDriveLogicalLibraryName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the logical libary (partition)
to which this physical drive is assocated.
If the drive is not associated with a logical
library, this field will be blank."
::= { physicalDriveEntry 8 }
phDriveLibrarySerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial Number of the library that this drive is
in as reported in SCSI Inquiry command,"
::= { physicalDriveEntry 9 }
phDriveState OBJECT-TYPE
SYNTAX OnlineState
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Device SCSI State."
::= { physicalDriveEntry 10 }
phDriveRasStatus OBJECT-TYPE
SYNTAX RASSubSystemStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Drive health status."
::= { physicalDriveEntry 11 }
phDriveNeedsCleaning OBJECT-TYPE

Quantum Scalar i500 Specifications

General

Form Factor	Rack-mountable
Product Type	Tape Library
Weight	Varies by configuration
Power Consumption	Varies by configuration
Drive Support	LTO-8, LTO-7, LTO-6
Management	Web-based remote management
Drive Type	LTO Ultrium
Supported Media	LTO-5, LTO-6, LTO-7, LTO-8
Operating Temperature	10°C to 35°C
Humidity	20% to 80% (non-condensing)
Interface	SAS