Quantum StorNext M660 - Page 57

Chapter 3: Basic System Operations
Powering On All StorNext M660 System Components
StorNext M660 Metadata Appliance Hardware Guide 51
The seven-segment LCD displays are located on each controller on the
back of the array as shown here:
3 Turn on the power switch on the front of each of the MDC Nodes.
Callout number 3 in Figure 25
on page 52 shows the location of the
power switches and the power on sequence.
Port
1
P
ID
/
Dia
g
Ln
k
Ln
k
Port
1
P
ID
/
Dia
g
L
nk Lnk
P
ort 2
P
ort 2
Metadata Array - rear