Chapter 3: Basic System Operations
Additional Common Operations
72 StorNext M660 Metadata Appliance Hardware Guide
15 From the SSH connection to the MDC node now operating as the
secondary, enter the following:
16 Confirm that the MDC node is operating as the secondary by
entering the following at the command line:
17 Verify the output is:
18 Repeat if desired to fail over to the original system operating as the
primary.
19 Verify that all clients have full access.
20 Test access to all file systems.
Additional Common Operations
Changing the MDC VIP
Address
To change the Virtual IP address for the M660, do the following:
service cvfs start
snhamgr -m status
:default:running:default:primary:
To Next Page
Loading...
